Rubrics Воронежский государственный лесотехнический университет имени Г.Ф. Морозова - Эдиторум

Popov Alexander , Moskalets Artem , Belyakov Sergey , Murashov Yuri , Veselovsky Anatoly , Popova Diana , Ivanova Galina , Yakovitskaya Marina , Radkevich Mikhail

DOI

https://doi.org/10.34220/2311-8873-2023-4-19

Published

18.04.2023

DEVELOPMENT OF A MATHEMATICAL MODEL OF THE GAS THERMAL SPRAYING PROCESS WITH OPTIMIZATION OF TECHNOLOGICAL MODES ACCORDING TO THE TEMPERATURE CRITERION

Volume, issue

1 № 1 (43) Published

Authors

Kadyrmetov Anvar , Simonova Julia , Chernykh Dmitry , Popov Dmitry

DOI

https://doi.org/10.34220/2311-8873-2023-20-34

Published

18.04.2023

INCREASING THE TECHNOLOGICAL PROCESSING OF WHOLE-LIT TURBINES, TAKING INTO ACCOUNT CONSTRUCTIVE TECHNOLOGICAL FEATURES

Volume, issue

3 № 3 (45) Published

Authors

Sukhochev Gennadiy , Grymzin Andrey

DOI

https://doi.org/10.34220/2311-8873-2023-3-3-3-18

Published

16.10.2023

PREPARATION OF SURFACES FROM VARIOUS MATERIALS BY COMBINED METHODS TO ENSURE THE QUALITY OF ASSEMBLIES OF NON-RIGID SHELLS

Volume, issue

3 № 3 (45) Published

Authors

Sukhochev Gennadiy , Podgornov Sergey

DOI

https://doi.org/10.34220/2311-8873-2023-3-3-19-33

Published

16.10.2023

STRENGTHENING WEAR PARTSSURFACES OF FORESTRY MACHINERY PARTS BY PLASMA APPLICATION AND HARDENING OF COATINGS OF VARIABLE COMPOSITION

Volume, issue

3 № 3 (45) Published

Authors

Plahotin Aleksandr , Kadyrmetov A. , Popov Dmitrii

DOI

https://doi.org/10.34220/2311-8873-2023-3-3-34-47

Published

16.10.2023

REGULARITIES OF VIBRATION MECHANOCHEMICAL CLEANING OF PARTS FROM OPERATIONAL CONTAMINATIONS UNDER THE CONDITIONS OF RENOVATION PRODUCTIO

Volume, issue

4 № 4 (46) Published

Authors

Lebedev Valeriy , Pastukhov Philip , Chaava Mihail

DOI

https://doi.org/10.34220/2311-8873-2023-4-13

Published

15.12.2023

INVESTIGATION OF TECHNOLOGICAL CAPABILITIES OF DEFORMATION CUTTING METHOD FOR THE INNER SURFACE ENHANCING OF HEAT EXCHANGE TUBES

Volume, issue

4 № 4 (46) Published

Authors

Zubkov Nikolai

DOI

https://doi.org/10.34220/2311-8873-2023-14-34

Published

15.12.2023

DEBURRING AND ROUNDING OF SHARP EDGES BY VIBRATION ABRASIVE TREATMENT ON BRONZE PARTS

Volume, issue

1 № 1 (47) Published

Authors

Prokopec Galina , Melnikova Elena , Prokopets Anatoly

DOI

https://doi.org/10.34220/2311-8873-2024-22-30

Published

09.04.2024

THEORETICAL ANALYSIS OF THE EFFECT OF CORROSION OF THE SURFACE OF MACHINE PARTS ON THE STRESS CONCENTRATION IN THE SURFACE LAYER OF THE MATERIAL OF THE PARTS

Volume, issue

1 № 1 (47) Published

Authors

Bezyazychnyy Vyacheslav , Pleshkun Vladislav

DOI

https://doi.org/10.34220/2311-8873-2024-11-21

Published

09.04.2024

METHOD FOR STRENGTHENING PARTS OF INTERNAL COMBUSTION ENGINES BY SURFACING OF CERAMIC MATERIALS

Volume, issue

1 № 1 (47) Published

Authors

Volkov Kirill , Ipatov Alexey

DOI

https://doi.org/10.34220/2311-8873-2024-3-10

Published

09.04.2024

ATOMIC-DISLOCATION MODEL OF SURFACE LAYER REMOVAL BY JET ELECTROLYTE-PLASMA POLISHING

Volume, issue

1 № 1 (47) Published

Authors

Popov Alexander

DOI

https://doi.org/10.34220/2311-8873-2024-31-51

Published

09.04.2024

ANALYSIS OF TECHNOLOGY EFFICIENCY PROCUREMENT AND EXPORT OF TIMBER USED IN THE MODERN CONDITIONS OF RUSSIAN DEVELOPMENT

Volume, issue

3 № 3 (33) Published

Authors

Posmetev Valerii , Nikonov Vadim

DOI

https://doi.org/10.34220/2311-8873-2020-3-3-36-55

Published

11.11.2020

IMPROVING THE EFFICIENCY OF TURNING HEAT-RESISTANT ALLOYS BY INTRODUCING THE ENERGY OF AN ULTRASONIC FIELD INTO THE CUTTING ZONE

Volume, issue

2 № 2 (44) Published

Authors

Khramov Alexander , Gorshkov Maxim , Nguyen Hanh , Kiselev Evgeny

DOI

https://doi.org/10.34220/2311-8873-2023-4-10

Published

19.07.2023

THE RESULTS OF ANALYSIS OF THE MAIN CAUSES OF INSUFFICIENT EFFICIENCY OF THE USE OF DOMESTIC FOREST TRANSPORT IN THE MODERN CONDITIONS OF FORESTRY PRODUCTION

Volume, issue

3 № 3 (33) Published

Authors

Posmetev Valerii , Nikonov Vadim

DOI

https://doi.org/10.34220/2311-8873-2020-3-3-57-79

Published

11.11.2020

NON-ABRASIVE FINISHING OF MACHINE PARTS BY COMBINED METHODS

Volume, issue

2 № 2 (44) Published

Authors

Smolentsev Evgeny , Babenkov Nikita , Gritsyuk Vasily , Kovalev Sergey

DOI

https://doi.org/10.34220/2311-8873-2023-7-9

Published

19.07.2023

POLAR-SYMMETRIC DEFORMATION OF AN ELASTIC CYLINDER UNDER TEMPERATURE-HUMIDITY EXPOSURE

Volume, issue

3 № 3 (33) Published

Authors

Ogarkov Vyacheslav , Aksenov Aleksei , Malyukov Sergei

DOI

https://doi.org/10.34220/2311-8873-2020-3-3-81-93

Published

11.11.2020

CALCULATION OF STRESS-DEFORMED STATE OF ELASTIC CYLINDERS UNDER TEMPERATURE AND HUMIDITY IMPACT

Volume, issue

3 № 3 (33) Published

Authors

Ogarkov Vyacheslav , Aksenov Aleksei , Malyukov Sergei , Malyukova Margarita

DOI

https://doi.org/10.34220/2311-8873-2020-3-3-94-112

Published

11.11.2020

TYPES OF WORKING TOOLS OF EQUIPMENT FOR LIFTING PLANTING MATERIAL WITH SOIL CLOD

Volume, issue

3 № 3 (33) Published

Authors

Druchinin Denis , Voskoboinik Mihail

DOI

https://doi.org/10.34220/2311-8873-2020-3-3-113-118

Published

11.11.2020

ANALYSIS OF DIAGNOSTIC TOOLS FOR ELECTROMAGNETIC GAS NOZZLES USED IN GAS FUEL SYSTEMS ON AUTOMOTIVE TRANSPORT

Volume, issue

3 № 3 (33) Published

Authors

Ivannikov Valerii , Nikulin M. , Polyakov Igor

DOI

https://doi.org/10.34220/2311-8873-2020-3-3-121-126

Published

11.11.2020

ANALYSIS OF THE EXISTING NUMERICAL METHODS FOR MODELING THE INTERACTION OF THE WORKING BODIES OF DIGGING AND SOIL-PROCESSING MACHINES WITH SOIL MEDIA

Volume, issue

3 № 3 (33) Published

Authors

Gnusov Maksim , Lisich Mihail

DOI

https://doi.org/10.34220/2311-8873-2020-3-3-128-139

Published

11.11.2020

PULSE MODULATION AS A WAY TO IMPROVE THE QUALITY OF PLASMA COATINGS

Volume, issue

3 № 3 (33) Published

Authors

Kadirmetov Anvar , Buhtoyarov Vladimir , Popov Petr

DOI

https://doi.org/10.34220/2311-8873-2020-3-3-140-142

Published

11.11.2020

ASSESSMENT OF THE STATUS OF THE MODERN PARK OF DOMESTIC AND FOREIGN FOREST TRANSPORT VEHICLES

Volume, issue

3 № 3 (33) Published

Authors

Nikonov Vadim , Posmetev Valerii

DOI

https://doi.org/10.34220/2311-8873-2020-3-3-144-163

Published

11.11.2020

ANALYSIS OF THE EFFICIENCY OF TRANSPORTATION OF PROCESSED TIMBER MATERIALS BY VARIOUS TYPES OF TRANSPORT AT THE CURRENT STAGE OF DEVELOPMENT OF THE RUSSIAN FEDERATION

Volume, issue

3 № 3 (33) Published

Authors

Nikonov Vadim , Posmetev Valerii

DOI

https://doi.org/10.34220/2311-8873-2020-3-3-164-190

Published

11.11.2020

STRATEGIES OF CONTROL OF TECHNICAL CONDITION OF FOREST MACHINES AT THE ITEM LEVEL

Published

Volume 1 №1

Yakovlev Konstantin

Published 05.02.2012

THE JUSTIFICATION OF RECOMMENDATIONS FOR REDUCING LOSSES OF TIMBER PRODUCTION

Published

Volume 1 №1

Kireev A

Published 05.02.2012

THE TRANSPORT-OPERATIONAL QUALITIES OF MOTOR ROADS IN THE LOGGING AREAS

Published

Volume 1 №1

Gubarev Vladimir

Published 05.02.2012

MEROPRIYATIYA PO OBESPECHENIYU BEZOPASNOSTI DOROZHNOGO DVIZHENIYA NA LESOVOZNYH AVTOMOBIL'NYH DOROGAH

Published

Volume 1 №1

Vakulin Aleksey

Published 05.02.2012

POVYSHENIE NADEZHNOSTI ZVENA «VODITEL'» V SISTEME «VODITEL'-AVTOMOBIL'-DOROGA SREDA»

Published

Volume 1 №1

Skvortsova Tatyana

Published 05.02.2012

THE RELIABILITY OF TRAINS IN OPERATION ON THE LOGGING ROADS

Published

Volume 1 №1

Volkov Aleksey

Published 05.02.2012

PROTECTION OF ROADSIDE TERRITORIES OF FOREST ROADS

Published

Volume 1 №1

Kondrashova Elena

Published 05.02.2012

MODELING OF THE INFLUENCE OF ROAD CONDITIONS ON THE EMISSION OF TOXIC SUBSTANCES

Published

Volume 1 №1

Logachev Viktor

Published 05.02.2012

THE IMPACT OF VARIOUS FACTORS ON SNEGOZADERZHATELI AMOUNTS THE ABILITY OF PROTECTIVE DEVICES

Published

Volume 1 №1

Morozov Pavel

Published 05.02.2012

OPTIMIZATION TECHNO-ECONOMIC MODEL IMPLEMENTATION OF ENVIRONMENTAL PROTECTION MEASURES

Published

Volume 1 №1

Skrypnikov Aleksey

Published 05.02.2012

ORGANIZATION OF WORKS ON WINTER MAINTENANCE OF FOREST ROADS AND PUBLIC ROADS

Published

Volume 1 №1

Chuvenkov Andrey

Published 05.02.2012

THE IMPACT OF TRANSPORT ON THE ENVIRONMENT

Published

Volume 1 №1

Ryabova Olga

Published 05.02.2012

RECOMMENDATIONS TO COMBAT ROAD NOISE

Published

Volume 1 №1

Ustinov Yuriy

Published 05.02.2012

THE BASIC METHODS TO ASSESS THE STRENGTH OF RIGID ROAD CLOTHES LOGGING ROADS

Published

Volume 1 №1

Logachev Viktor , Skrypnikov Aleksey

Published 05.02.2012

THE ECONOMIC EFFICIENCY OF SCHEMES OF ORGANIZATION OF WORKS ON WINTER MAINTENANCE OF ROADS

Published

Volume 1 №1

Skrypnikov Aleksey , Vakulin Aleksey

Published 05.02.2012

THE PROCESS MODELING REPAIR SECURITY ELEMENTS OF THE HARVESTING MACHINE

Published

Volume 1 №1

Yakovlev Konstantin

Published 05.02.2012

AUTOMATED ANALYSIS OF PAVEMENT STRUCTURES

Published

Volume 1 №1

Kondrashova Elena , Skvortsova Tatyana

Published 05.02.2012

THE SCHEME FOR DETERMINING THE PERMISSIBLE DISTANCE OF THE EDGE OF THE SUBGRADE

Published

Volume 1 №2

Skrypnikov Aleksey , Kondrashova Elena , Skvortsova Tatyana Vladimirovna

Published 10.04.2012

THE LOGICAL-PROBABILISTIC METHODS APPLIED TO CALCULATION OF INDICATORS OF RELIABILITY OF THE CAR

Published

Volume 4 №1

Published 15.04.2015

"INTELLECTUAL PROPERTY PROTECTION" AND "BASIC PATENT": PROBLEMS AND PECULIARITIES OF TEACHING

Published

Volume 1 №2

Nezhivaya Olga , Belenko Elena

Published 10.04.2012

THE CALCULATION OF THE STRESS-STRAIN STATE OF THE ELASTIC CYLINDER

Published

Volume 1 №2

Ogarkov V

Published 10.04.2012

INFLUENCE OF PRODUCTION FACTORS ON RESOURCEPREP - TION IN THE CONSTRUCTION OF FOREST ROADS

Published

Volume 1 №2

Skrypnikov Aleksey , Logachev Viktor , Skvortsova Tatyana , Kondrashova Elena , Vakulin Aleksey

Published 10.04.2012

STUDY OF ELASTIC AND STRENGTH PROPERTIES OF PINE WOOD

Published

Volume 1 №2

Fedyanina Natalya , Storodubtseva Tamara

Published 10.04.2012

MANUFACTURE OF RAILWAY SLEEPERS FROM FOREST WASTE

Published

Volume 1 №2

Kharchevnikov Vitaliy , Fedyanina Natalya , Storodubtseva Tamara , Tomilin A

Published 10.04.2012

INCREASED PERMEABILITY OF CYLINDRICAL BILLETS OF WOOD FROM THE END WITH ALTERNATING PRESSURE

Published

Volume 1 №2

Minaev M

Published 10.04.2012

PROBLEMS OF OPERATION OF THE MOTOR TRANSPORT AND WAY OF THEIR DECISION WITH USE MODERN INFOMATSIONNO-KOMMUNIKATSIONNYH OF TECHNOLOGIES

Published

Volume 4 №1

Nikonov Vadim , Posmetev Valeriy , Bevz V

Published 15.04.2015

CHANGES IN STRENGTH AND ELASTIC PROPERTIES OF POLYMER COMPOSITE IN THE INTRODUCTION MEMBERSHIP OF GRAPHITE

Published

Volume 4 №1

Chernikov E.

Published 15.04.2015

INCREASE OF POWER EFFICIENCY OF WOOD MACHINES

Published

Volume 4 №1

Khakhina A , Nikiforova A , Rudov M.

Published 15.04.2015

ANALYSIS PERSPECTIVE CONSTRUCTIVE SOLUTION PLASMA GENERATORS FOR PLASMA SPRAYING

Published

Volume 4 №1

Kadyrmetov Anvar , Nikonov Vadim , Pustovalov A. , Maltsev Aleksandr

Published 15.04.2015

SPECIFIC FAILURE TRACTION EQUIPMENT OF ROLLING STOCK

Published

Volume 4 №1

Karpenko Stanislav

Published 15.04.2015

INFLUENCE OF AERODYNAMICS SAFETY OF OPERATION OF VEHICLES

Published

Volume 4 №1

Kiseleva Natalya

Published 15.04.2015

PARTICULAR OPERATING CONDITIONS OF THE WORKING BODIES OF BUILDING AND ROAD MACHINES AND FACTORS AF-FECT THEIR RESOURCE

Published

Volume 4 №1

Popov Dmitriy , Patyukov S

Published 15.04.2015

ANALYSIS OF THE PLOTS EXPLOITATION MOBILE LABORATORIES DEFECTOSCOPIC LDM-1

Published

Volume 4 №1

Platonov Aleksey

Published 15.04.2015

MATHEMATICAL SUBSTANTIATION OF TECHNOLOGICAL PROCESS OF SEPARATION OF FOREST SEED HEAP

Published

Volume 4 №1

Novikov Arthur

Published 15.04.2015

MANIPULATOR FOR PLASMA SPRAYING COATINGS AND HARDENING OF CYLINDRICAL SURFACES WITH EXCENTRICITY

Published

Volume 4 №1

Bukhtoyarov Vladimir , Budyukin A , Kadyrmetov Anvar , Likhacheva A

Published 15.04.2015

FORMAIZED STATEMENT MATHEMATICAL MODEL FOR DETERMINING THE EFFICIENCY OF LESOTRANSPORTNYH PROCESSES

Published

Volume 4 №3

Sushkov Oleg

Published 30.09.2015

METHODS OF THEORETICAL JUSTIFICATION OF DESIGN TOOLS TO THE IMPLEMENT OF THE TRACTOR WHEN MOUNTING ONTO A FOREST DISC TOOLS

Published

Volume 4 №3

Posmetev Viktor , Posmetev Valeriy , Latysheva Margarita

Published 30.09.2015

THE RESULTS OF EXPERIMENTAL STUDIES OF ADAPTATION TO THE TRACTOR SHEDS SERIAL DEVICES

Published

Volume 4 №3

Posmetev Viktor , Posmetev Valeriy , Latysheva Margarita

Published 30.09.2015

THE MAIN REASONS FOR THE LACK OF EFFECTIVENESS OF FOREST AND TILLAGE UNITS AND WAYS TO IMPROVE

Published

Volume 4 №3

Posmetev Valeriy , Zelikov V. , Latysheva Margarita

Published 30.09.2015

SCHEME TO SELECT THE DESIRED OPTION ELECTRODYNAMIC BRAKING OF THE INDUCTION MOTOR

Published

Volume 4 №3

Mazukha N.

Published 30.09.2015

OPTION PROTECTION MANURE BELT BREAKAGE DURING FREEZING AND A VARIETY OF SCRAPERS PEREGRUHKAH

Published

Volume 4 №3

Mazukha A.

Published 30.09.2015

USING THE MULTIFUNCTION RELAY INSULATION MONITORING AND CONTROL PHASES IN THE CONTROL CIRCUIT BY A CRANE

Published

Volume 4 №3

Mazukha N. , Mazukha A.

Published 30.09.2015

THE EFFECTIVENESS OF THE RECOVERY OF USED MACHINE PARTS BY PLASMA SPRAYING AND HARDENING WITH THE MODULATION PARAMETERS

Published

Volume 4 №3

Sukhochev Gennadiy , Kadyrmetov Anvar , Maltsev Aleksandr

Published 30.09.2015

ANALYSIS OF THE EFFECT OF IRON-CARBON ALLOY CONSTITUENTS ON THEIR WEAR RESISTANCE IN CONTACT WITH THE ABRASIVE MEDIUM

Published

Volume 4 №3

Popov Dmitriy , Simvolokov A.

Published 30.09.2015

MODERN TECHNICAL EQUIPMENT FOR HAZARDOUS PRODUCTION FACILITIES OF STORAGE AND PROCESSING OF VEGETABLE RAW MATERIALS

Published

Volume 4 №3

Panova L , Atamanov Sergey , Gorbunov E

Published 30.09.2015

USE OF A SYSTEMATIC APPROACH TO SUPPORT THE DESIGN PARAMETERS SKIDDER

Published

Volume 4 №3

Yakovlev Konstantin

Published 30.09.2015

THE RELEVANCE OF THE PROBLEM OF THE DEVELOPMENT EFFECTIVENESS OF ON-BOARD DIAGNOSTIC SYSTEM LOGGING VEHICLES

Published

Volume 4 №3

Nikonov Vadim , Posmetev Valeriy

Published 30.09.2015

MANAGEMENT STRATEGY TECHNICAL CONDITION OF VEHICLES

Published

Volume 4 №3

Polyakov Igor , Ivannikov V , Nikonov Vadim

Published 30.09.2015

THE STUDY COVERS THE STATE ON FOREST ROADS WITH LIMESTONE

Published

Volume 4 №3

Kozlov V , Skrypnikov Aleksey , Skvortsova Tatyana

Published 30.09.2015

LOGICAL AND PROBABILISTIC METHODS IN THE CALCULATION OF RELIABILITY INDICES

Published

Volume 4 №3

Shipilov A

Published 30.09.2015

METHOD FOR DETERMINING THE OPTIMUM LAND USE

Published

Volume 4 №3

Sushkov Oleg

Published 30.09.2015

ON ASSESSMENT OF THE IMPACT OF MAN-MADE FORESTRY TRANSPORT ON THE ENVIRONMENT

Published

Volume 4 №3

Sushkov Oleg

Published 30.09.2015

TOWARDS THE CREATION OF ADHESIVE JOINTS EXTRA STRENGTH

Published

Volume 4 №2

Popov Viktor , Novikov A

Published 30.06.2015

INFORMATION SYSTEMS TECHNOLOGY TRANSPORT PRO-CESSES IN MODELS MULTICRITERIA STEPWISE SELECTION

Published

Volume 4 №2

Kashchenko S , Belokurov S , Denisov G. , Belokurov Vladimir , Artemov A.

Published 30.06.2015

THE QUESTION OF IMPROVING THE DEVELOPMENT DATA-BASE OF FOREST CONCESSION AREAS WOODLAND

Published

Volume 4 №2

Ivannikov V , Sushkov Sergey Ivanovich

Published 30.06.2015

MATHEMATICAL JUSTIFICATION PROCESS SORTING FOREST SEEDS BY SIZE

Published

Volume 4 №2

Novikov Arthur

Published 30.06.2015

DEVELOPMENT OF MODELS OF TRANSPORT AND DISTRIBU-TIVE TASKS FOR VARIOUS CATEGORIES OF FOREST AREAS

Published

Volume 4 №2

Ivannikov V , Sushkov Sergey Ivanovich , Nikonov Vadim

Published 30.06.2015

TOOLS FOR PREVENTION AND FIGHTING FOREST FIRES

Published

Volume 4 №2

Stupnikov Dmitriy Sergeevich

Published 30.06.2015

SUBSTANTIATION OF THE RECONSTRUCTION OF THE REPAIR OF ENGINES IN PRODUCING TECHNICAL-TIVELY EMERGENCY CENTER IN VORONEZH

Published

Volume 4 №2

Ozhiganov Aleksey

Published 30.06.2015

ENERGY IN RURAL AND ELECTRIC NETWORKS

Published

Volume 4 №4

Gukov P. , Avdeev A

Published 26.12.2015

METHODS FOR THE DETERMINATION OF HUMAN IMPACT ON SOIL ROADSIDE TERRITORIES WITH THE FLOW OF LOGGING TRUCKS

Published

Volume 4 №4

Sushkov Oleg

Published 26.12.2015

INFLUENCE GRAIN SIZE AND CONTACT TEMPERATURE ON THE TRIBOLOGICAL CHARACTERISTICS OF THE ALLOY TI49,3NI50,7

Published

Volume 4 №4

Stolyarov V , Shuster L , Chertovskikh S , Misochenko A

Published 26.12.2015

INNOVATIVE WAYS PHYSICOTECHNICAL PROCESSING

Published

Volume 4 №4

Kozlov V , Trishina Tatyana

Published 26.12.2015

DEVELOPMENT OF MEMBRANE SENSORS BASED ON NEW HYBRID MATERIALS FOR THE DETERMINATION OF SULFUR AND MEDICI-NAL SUBSTANCES IN DOMESTIC AND INDUSTRIAL EFFLUENTS

Published

Volume 4 №4

Bobreshova O , Denisova T , Parshina A

Published 26.12.2015

STUDY FOR STRENGTHENING SOIL STRUCTURES UNDER CON-STRUCTION LOGGING HIGHWAY

Published

Volume 4 №4

Kozlov V , Gubarev Vladimir , Kondrashova Elena , Bobrov V

Published 26.12.2015

ASSESSMENT OF POLLUTION OF THE TERRITORY AGROENGI-NEERING FACULTY ELECTRIC FIELDS

Published

Volume 4 №4

Popov N , Pisarev V

Published 26.12.2015

OPTION ACCELERATE THE LIQUIDATION OF FAILURE ON LOSS OF MAINS PHASE DURING OPERATION OF WOODWORKING PLANTS

Published

Volume 4 №4

Mazukha N.

Published 26.12.2015

METHOD ACTIVATION END DATE IN THE PAST. DIRECTION:RE

Published

Volume 4 №4

Yakovlev D.

Published 26.12.2015

THE EVALUATION OF THE USE OF WOOD IN GREEN ECONOMY

Published

Volume 4 №4

Posmetev Valeriy

Published 26.12.2015

THE CONTROL CIRCUIT ENGINE CRANE WITH LOW SPEED BEFORE BRAKING

Published

Volume 4 №4

Mazukha N.

Published 26.12.2015

ON IMPROVING THE QUALITY OF TRAINING AND RETRAINING DRIVERS

Published

Volume 4 №4

Artemov A. , Klimova G. , Stegantsev A

Published 26.12.2015

JUSTIFICATION OF THE METHOD OF SEPARATING THE NEEDLES GREEN WOOD BY TREATING IT IN A MICROWAVE FIELD

Published

Volume 4 №4

Posmetev Valeriy

Published 26.12.2015

PURE BENDING OF ELASTIC CURVE OF A BEAM

Published

Volume 3 №4 (34)

Ogarkov Vyacheslav , Aksenov Aleksei , Malyukov Sergei , Knyazev Aleksandr , Borodin Nikolai

Published 21.12.2020

CLASSIFICATION OF MULCHERS

Published

Volume 3 №4 (34)

Malyukov Sergei , Aksenov Aleksei , Malyukova Margarita

Published 21.12.2020

ANALYSIS OF THE PROCESS OF ENTERING A SPECIALIZED LEFT-STEERING PHASE REGULATION

Published

Volume 3 №4 (34)

Dorohin Sergei , Lihachev Dmitrii , Bogdanov Sergei , Sorokin Aleksei

Published 21.12.2020

HEAT EXCHANGE IN THE AREA OF SURFACE CONTACT WITH SHAPE DEVIATIONS

Published

Volume 3 №4 (34)

Popov Viktor , Dornyak Olga , Latinin Andrei , Lushnikova Elena

Published 21.12.2020

CREATING DURABLE WOOD GLUE STRUCTURES BASED ON PHYSICOMODIFIED ADHESIVES

Published

Volume 3 №4 (34)

Popov Viktor , Dornyak Olga , Latinin A. , Lushnikova Elena

Published 21.12.2020

PROCESSING OF DISC KNIFE CONSTRUCTIONS WITH STRETCHLESS DIVISION

Published

Volume 3 №4 (34)

Ivanovskii Vladimir , Kurnikova Anna , Jujukin Nikolai , Safarov Kishvarsho

Published 21.12.2020

INCREASING THE TRACTIVE EFFORT OF FOREST WINCHES DURING LOADING AND UNLOADING OPERATIONS

Published

Volume 3 №4 (34)

Jujukin Nikolai , Kondratev Leonid

Published 21.12.2020

EXPEDIENCY OF USING FRICTION-BEARING ASBESTOS-RUBBER MATERIALS IN FRICTION UNITS

Published

Volume 3 №4 (34)

Kondratev Leonid , Jujukin Nikolai

Published 21.12.2020

ON THE QUESTION OF TECHNOLOGICAL SUPPORT OF PLASMA SPRAYING PROCESSES OF MULTI-COMPONENT COATINGS

Published

Volume 3 №4 (34)

Kadirmetov Anvar , Snyatkov E. , Popov Dmitrii , Plahotin Aleksandr , Radigin Kirill

Published 21.12.2020

DYNAMIC MODEL OF THE DRIVE MACHINES FOREST COMPLEX

Published

Volume 3 №4 (34)

Yudin Roman , Puzakov Rostislav

Published 21.12.2020

HARDENING OF THE BEARING JOURNALS AND CAMSHAFT LOBES

Published

Volume 3 №4 (34)

Kadyrmetov A. , Buhtoyarov Vladimir , Popov Petr , Duz Alina , Plaksina Natalya , Sahnov Aleksei

Published 21.12.2020

SIMULATION OF TRUCKING MODE CARS WITH A COMBINED ELASTIC ELEMENT IN THE REAR AXLE SUSPENSION

Published

Volume 3 №4 (34)

Pryadkin Vladimir , Zavyalov Aleksandr

Published 21.12.2020

ACOUSTIC INTENSIFICATION OF PROCESSES IN THE PLASMA OF THE GLOW DISCHARGE FOR TECHNOLOGICAL PROCESSES

Published

Volume 1 №1 (35)

Fadeev Sergei , Shaidullin Linar , Kadirmetov Anvar

Published 16.01.2022

FEATURES OF IRON COATING ELECTRO-GALVANIC METHOD

Published

Volume 1 №1 (35)

Gorozhankina Olga

Published 16.01.2022

TO THE QUESTION OF STRUCTURAL FEATURES OF IRON COATINGS OF HIGH THICKNESS OBTAINED BY THE ELECTROGALVANIC METHOD WITH MECHANICAL LAYER-LAYER HARDENING

Published

Volume 1 №1 (35)

Gorozhankina Olga , Vinokurova Irina , Kadirmetov Anvar

Published 16.01.2022

FEATURES OF APPLICATION OF GAS-THERMAL AND PLASMA METHODS FOR OBTAINING FUNCTIONAL COATINGS

Published

Volume 1 №1 (35)

Kadirmetov Anvar , Simonova Yuliya

Published 16.01.2022

SIMULATION OF WAVE PROPAGATION ACCELERATIONS IN A THREE-COMPONENT MEDIUM DURING THE FORMATION OF A COMPOSITE COATING PLASMA SPRAYING

Published

Volume 2 №2 (36)

ZHachkin Sergej , Pen'kov Nikita , Kukarskih Lyubov' , Trifonov Grigorij

Published 25.01.2022

PROPERTIES OF PLASMA COATINGS SPRAYED IN ARC POWER MODULA-TION MODE

Published

Volume 2 №2 (36)

Kadyrmetov Anvar , Snyatkov Evgenij , Plahotin Aleksandr , Mandrykin Igor'

Published 25.01.2022

EFFECT OF A MULTIPLE REFUELING OF THE FECOCRALTICUNIMO COATING OBTAINED BY PLASMA METALLIZATION, ON ITS WEAR RESISTANCE DURING DRY FRICTION

Published

Volume 2 №2 (36)

Popov Dmitrij , Snyatkov E. , Plahotin Aleksandr , Mandrykin Igor' , Popov Petr

Published 25.01.2022

INFLUENCE OF ELECTR LYTEFLOW PARAMETERS AT ELECTROCHEMICAL DIMENSIONAL PROCESSIG ON THE QUALITY OF HOLE FORMATION IN PARTS OF ROCKET AND SPACE EQUIPMENT

Published

Volume 3 №3 (37)

Boldyrev Alexander , Boldyrev Alexander , Sukhorukov Vladimir , Starodubtsev Igor

Published 02.02.2022

ADHESION CHARACTERISTICS OF THIN FILM COATING DEPOSITED AT FINAL PLASMA HARDENING

Published

Volume 3 №3 (37)

Topolyansky Pavel , Ermakov Sergey , Topolyansky Andrey

Published 02.02.2022

FACTOR PLANNING OF AN EXPERIMENT FOR ESTIMATING THE OPTIMAL PROPERTIES OF HEAT PROTECTIVE COATINGS ON DETAILS OF A CYLINDER-PISTON GROUP OF DIESEL ENGINES

Published

Volume 3 №3 (37)

Al-Bdeiri Mahmud , Krasilnikov Vladimir , Kadyrmetov A. , Sergeev Sergei

Published 02.02.2022

PULSE-SHOCK TREATMENT OF NARROWING INTER-PUMP CHANNELS

Published

Volume 3 №3 (37)

Nekrylov Andrey , Kodentsev Sergei , Rodionov Alexander

Published 02.02.2022

TECHNOLOGICAL SUPPORT OF THE PROCESS OF COMBINED HARDENING SURFACES OF THE BLADES

Published

Volume 4 №4 (38)

Silaev Denis , Kodentsev Sergei , Gorelikov Vladimir

Published 09.02.2022

TO THE QUESTION OF SURFACE TREATMENT OF CPG PARTS IN THE PROCESS OF APPLYING COATINGS ON THEM

Published

Volume 4 №4 (38)

Al-Bdeiri Mahmud , Krasilnikov Vladimir , Kadyrmetov A. , Sergeev Sergei

Published 09.02.2022

DEVELOPMENT OF AN EFFECTIVE MELTING MODE OF THE METAL-MACHINE COMPOSITION PR-12X18N10T

Published

Volume 4 №4 (38)

Mazalov Alexey , Silutin Dmitry , Zelenina Lydia , Endaltsev Evgeny

Published 09.02.2022

PERSPECTIVE DIRECTIONS OF IMPROVEMENT OF PLASMA SPRAYING TECHNOLOGY WITH P ULSE MODULATION OF THE ARC CURRENT

Published

Volume 1 №1 (39)

Kadyrmetov Anvar , Snyatkov Evgenij , Plahotin Aleksandr , Mandrykin Igor' , Burenko Nikita

Published 04.11.2022

TECHNOLOGICAL EQUIPMENT TO OP-TIMIZE PLASMA SPRAYING ACCORDING TO THE VELOCITY PARAMETER OF SPRAYED PARTICLES

Published

Volume 1 №1 (39)

Plahotin Aleksandr , Mandrykin Igor' , Kadirmetov Anvar , Popov Petr , Bolgov Andrei

Published 04.11.2022

SUPERFICIAL HARDENING OF PROTEC-TIVE COATINGS OF LOADED PARTS OF THERMO- AND ELECTROMECHANICAL TREATMENT

Published

Volume 1 №1 (39)

Popov Dmitrii , Sukhochev Gennadiy , Nikonov Vadim , Sniatkov Evgenii , Balahnova Yuliya

Published 04.11.2022

CAE SIMULATION OF THE FORMATION OF FINNED STRUCTURES PRODUCED BY THE DEFORMATIONAL CUTTING METHOD

Published

Volume 2 №2 (40)

Zubkov Nikolai , Cukanov Denis , Buzaev Dmitrii , Bityuckaya Yuliya

Published 14.11.2022

EVOLUTION OF THE DESIGN OF A MULTI-CONTACT VIBRATION IMPACT TOOL AND THE MAIN WAYS OF ITS DEVELOPMENT

Published

Volume 2 №2 (40)

Prokopets Galina , Prokopets Anatoly

Published 14.11.2022

DEVELOPMENT OF A PHOTOPOLYMER-ABRASIVE COMPOSITE FOR 3D PRINTING TOOLS

Published

Volume 3 №3 (41)

Goloburdin Dmitriy , Kozlov Alexander , Kozlov Andrey

Published 10.12.2022

TECHNOLOGICAL EQUIPMENT OF ELECTROEROSION TREATMENT FOR OBTAINING COMPLEX PROFILE HOLES IN THE HOUSINGS OF TURBOPUMP UNITS

Published

Volume 3 №3 (41)

Smolentsev Evgeny , Milinchuk Kirill , Gritsyuk Vasily

Published 10.12.2022

COMBINED ELECTRODE-BRUSH TREATMENT OF SURFACES OF PRODUCTS WITH VARIABLE ALLOWANCE

Published

Volume 4 №4 (42)

Kirillov Oleg , Kuts Vadim , Shendrikova Olesya

Published 27.12.2022

TECHNOLOGICAL AND QUALITY INDICATORS OF FLOWING SURFACES AFTER COMBINED PROCESSING

Published

Volume 4 №4 (42)

Grymzin Andrey , Podgornov Sergey , Sukhochev Gennadiy , Kudentsev Sergey

Published 27.12.2022

ELECTROPHYSICAL REGULARITIES OF JET ELECTROLYTE-PLASMA PROCESSING

Published

Volume 1 №1 (43)

Popov Alexander , Moskalets Artem , Belyakov Sergey , Murashov Yuri , Veselovsky Anatoly , Popova Diana , Ivanova Galina , Yakovitskaya Marina , Radkevich Mikhail

Published 18.04.2023

DEVELOPMENT OF A MATHEMATICAL MODEL OF THE GAS THERMAL SPRAYING PROCESS WITH OPTIMIZATION OF TECHNOLOGICAL MODES ACCORDING TO THE TEMPERATURE CRITERION

Published

Volume 1 №1 (43)

Kadyrmetov Anvar , Simonova Julia , Chernykh Dmitry , Popov Dmitry

Published 18.04.2023

INCREASING THE TECHNOLOGICAL PROCESSING OF WHOLE-LIT TURBINES, TAKING INTO ACCOUNT CONSTRUCTIVE TECHNOLOGICAL FEATURES

Published

Volume 3 №3 (45)

Sukhochev Gennadiy , Grymzin Andrey

Published 16.10.2023

PREPARATION OF SURFACES FROM VARIOUS MATERIALS BY COMBINED METHODS TO ENSURE THE QUALITY OF ASSEMBLIES OF NON-RIGID SHELLS