UDC 63

CLASSIFICATION OF MULCHERS

Published in Voronezh Scientific-Technical Bulletin · Volume 3, Issue 4, 2020 · Pages 44–50 · Rubric: TEHNOLOGIYa I OBORUDOVANIE MEHANIChESKOY I FIZIKO-TEHNIChESKOY OBRABOTKI
DOI: https://doi.org/10.34220/2311-8873-2021-4-4-44-50
Received: 20.12.2020 Accepted: 20.12.2020 Published: 20.12.2020 Language of publication: ru-RU
Mulchers are very useful in creating and caring for the forest. A wide range of different types of mulchers can disorient potential buyers. This article was aimed at creating a classification of mulchers based on an assessment of the most important parameters: weight, required engine power and diameter of the cut wood. Six classes of machines were created, their boundaries were defined and mulchers were assigned to these classes. Class K1 (weight up to 1300 kg; capacity up to 75 kilowatts; diameter of the working body up to 22 centimeters) the most common – 88 units of mulchers. It is followed by class K2 (1800 kilograms; 100 kilowatts; 27 centimeters) – 61 pieces, class K4 (3200 kg; 175 kW; 41 centimeters) – 44 pieces, class K3 (2300 kg; 125 kilowatts; 31 centimeters) – 34 pcs., class K5 (4100 kg; 225 kW; 51 centimeters) – 18 pcs. and class K6 (without upper limit) – 9 pcs.
mulchers, diameter of cut wood, engine power, weight, classification.
Text References
Text (PDF)
Read Download

1. Bukoveczky, J., Gulan, L., Zajacová, Ľ. & Schmidtová, C. Určenie veľkostného radu skupiny mobilných pracovných strojov (Determination of size range of mobile machines) // Zborník MVK Mobilné energetické prostriedky -Hydraulika - Životné prostredie - Ergonómia mobilných strojov, FEVT, Zvolen 2007.

2. Čedík, J., Pexa, M., Chyba, J., Vondrášek, Z. & Pražan,R. Influence of blade shape on mulcher blade air resistance // Agronomy Research, 2016, no. 14(2), pp. 337-344.

3. Eisenbarth, E. Mulchgerate im Praxisvergleich (A comparison of mulching machines) // AFZ/Der Wald 55, 2000, pp. 518-522.

4. Gitlow, H. Tools and Methods for the Improvement of Quality. Richard D. Irwin, INC., Homewood, Illinois, 1989, 603 p.

5. Hnilica, R., Mesingerová, V., Hnilicová, M. & Stanovský,M. Drviče nežiadúcich nárastov s mechanickým prenosom energie (Mulchers of undesirable advance growth with mechanical transmission of energy). // Les. Pr. 92, 2012, pp. 152-158.

6. Hosseini, S. S. & Shamsi, M. Performance optimization of a rotary mower using Taguchi method. // Agronomy Research, 2012, no. 10(1), pp. 49-54.

7. Kronbergs, A., Kronbergs, E. & Repsa, E. Evaluation of reed canary grass shredding and compacting properties // Agronomy research, 2013, no. 11(1), pp. 61-66.

8. Kumhála,F., Chyba, J., Pexa, M. & Čedík,J. Measurement of mulcher power input in relation to yield. // Agronomy Research, 2016, no. 14(4), pp. 1380-1385.

9. Majdan, R., Tkáč, Z., Abrahám,R. & Kosiba, J. Teória a konštrukcia traktorov (Theory and construction of tractors) Slovak University of Agriculture in Nitra, Nitra Slovakia, 2012, 100 p.

10. Pecenka, R. & Hoffmann, T. Harvest technology for short rotation coppices and costs of harvest, transport and storage // Agronomy Research 2015, no. 13(2), pp. 361-371.

11. Rao, S. Reliability-Based Design. McGraw Hill, New York, 1992, 569 p.

12. Scheer, Ľ. & Sedmák,R. Biometria (Biometry). Technická univerzita vo Zvolene, Zvolen, Slovakia, 2007, 333 p.

13. Sloboda, A., et all. Konštrukcia kolesových a pásových vozidiel: teória, konštrukcia, riziká. (The design of wheeled and crawler-type vehicles). Vienala, Košice, 2008, 547 p.

14. Syrový,O., et all. Energy savings in crop production technologies. In : Research Institute of Agricultural Engineering, p. r. i., Prague, 2008, 101 p.

15. Štollmann, V. & Slugeň, J. Návrh novej kategorizácie harvesterov na základe analýzy hmotnostných a výkonových parametrov (A proposal of new classification of harvesters based on weight and performance parameters). // Acta Facult. For. 2009, no.51, pp. 101-109.

16. Zemánek, P., Abrham, Z. & Burg, P. Economic effectiveness of mulching machines operations. // Hortic. Sci., 2004, no. 31, pp. 76-80.