VAK Russia 05.02.07 UDC 621

INFLUENCE OF ELECTR LYTEFLOW PARAMETERS AT ELECTROCHEMICAL DIMENSIONAL PROCESSIG ON THE QUALITY OF HOLE FORMATION IN PARTS OF ROCKET AND SPACE EQUIPMENT

Published in Voronezh Scientific-Technical Bulletin · Volume 3, Issue 3, 2022 · Pages 3–10 · Rubric: TEHNOLOGIYa I OBORUDOVANIE MEHANIChESKOY I FIZIKO-TEHNIChESKOY OBRABOTKI
DOI: https://doi.org/10.34220/2311-8873-2022-3-10
Received: 01.02.2022 Accepted: 02.02.2022 Published: 02.02.2022 Language of publication: ru-RU
The paper presents the results of a study of the influence of the schemes of supply and removal of the electrolyte flow and its parameters (electrolyte pressure at the inlet PBX and pressure drop Δp) on the quality of electrochemical shaping of holes in samples of stainless and titanium alloys used in the manufacture of parts of rocket and space technology. It is shown that the change in PBX and Δp has a significant effect on the quality of hole formation. It has been experimentally established that the scheme of lateral electrolyte supply is preferable.
ELECTROCHEMICAL HOLE FOR-MATION, ELECTROLYTE FLOW SUPPLY, STAINLESS AND TITANIUM ALLOYS.
Text References
Text (PDF)
Read Download

1. Shaboldo, O. P. Materials and technologies for the development of JSC "TsNIIM" for products of aviation and space technology / O. P. Shaboldo, S. K. Gordeev, V. B. Vikhman, D. A. Trubin // Materials and technologies new generation for promising products of aviation and space technology: materials of the V All-Russian Scientific and Technical Conference (Moscow, July 19, 2021). M. : VIAM, 2021. - S. 8-22.

2. Kablov, E. I. Materials for aerospace engineering / E. I. Kablov // All materials. Encyclopedic reference book. 2007, - No. 5. - S. 7-27.

3. Technological processes of mechanical and physical-chemical processing in aircraft engine building: textbook. allowance / V. F. Bezyazyachny, M. L. Kuzmenko, V. N. Krylov and others: ed. V. F. Bezyazychny. M. : Mashinostroenie, 2007. - 539 p.

4. Theory of electrical and physico-chemical processing methods. Part 1. Processing of materials with the use of tools: textbook. allowance / V. P. Smolentsev, A. I. Boldyrev, E. V. Smolentsev and others: ed. V. P. Smolentsev. Voronezh: GOU VPO "Voronezh State Technical University", 2008. - 248 p.

5. Modern technologies of shaping / V. A. Lebedev, A. I. Boldyrev, M. A. Tamarkin, Yu. P. Ankudimov. M. : INFRA-M, 2019. - 320 p.

6. Smolentsev, V.P. Technology of electrochemical treatment of internal surfaces / V.P. Smolentsev. M.: Mashinostroenie. 1978. - 176 p.

7. Kolotyrkin, Ya. M. Anomalous phenomena in the dissolution of metals / Ya. M. Kolotyrkin, G. M. Florianovich // Itogi Nauki. Electrochemistry, vol. 7. M. : VINITI, 1981. - S. 5-64.

8. Serebryannikova, N.V. Voltammetry: textbook. allowance / N. V. Serebrennikova, N. V. Ivanova. Kemerovo: Kuzbassvuzizdat, 2007. - 81 p.

9. Scholz F. Electroanalytical methods / F. Scholz. Springer, 2002. - 331 rubles.

10. De Regt S. Application of ECM for the production of precision parts / S. De Regt // International Symposium on Electrical Machining Methods. JSEM-8. M.: 1986. - S. 129-138.

11. Xya X. M. Investigation of anode processes in pulsed ECM / X. M. Xya, Z. H. Liu, Yu. Ts. Y. // International Symposium on Electrical Processing Methods. JSEM-8. M. : 1986. - S. 147-148.

12. Zaidman, G. N. Shaping during electrochemical dimensional processing of metals / G. N. Zaidman, Yu. N. Petrov. Chisinau: Shtiintsa. 1990. - 190 p.

13. Amirkhanova, N.A. Electrochemical dimensional processing of materials in mechanical engineering: textbook. allowance / N. A. Amirkhanova, A. N. Zaitsev, R. A. Zaripov. Ufa: Ufimsk. state aviation un-t, 2004. - 258 p.

14. Shcherbak, M. V. Fundamentals of the theory and practice of electrochemical processing of metals and alloys / M. V. Shcherbak, M. A. Tolstaya, A. P. Anisimov, M. V. Postanogov. M: Mashinostroenie, 1981. - 263 p.

15. Davydov, A. D. Effect of electrolyte flow on the process of electrochemical dimensional processing of metals / A. D. Davydov, V. D. Kashcheev, B. N. Kabanov // Physics and Chemistry of Materials Processing. 1979, - No. 6. - S. 13-17.

16. Zaidman, G. N., Mochalova G. L., Petrov Yu. N. Influence of hydrodynamic conditions of electrolyte flow on the process of electrochemical dimensional processing of metals // Physics and Chemistry of Materials Processing. 1980, - No. 1. - S. 36-41.

17. Monina, M. A. Methods for choosing electrolytes in electrochemical dimensional processing / M. A. Monina, I. I. Moroz, Yu. S. Volkov // Electrophysical methods of processing materials. M. : MDNTP, 1982. - S. 8-12.

18. Saushkin, B.P. Choice and application of electrolytes for electrochemical processing of metals / B.P. Saushkin. M. : VNIITEMR, 1992. - 68 p.

19. Handbook on electrochemical and electrophysical processing methods / G. L. Amitan, I. A. Baisupov, Yu. ed. V. A. Volosatov. L. : Mashinostroenie, 1988. - 719 p.

20. Zaidman, G. N., Dikusar, A. I., Petrenko, V. I., Petrov, Yu. 1978, - No. 2. - S. 17-20.

21. Parshutin, V. V. Technical and economic issues of electrochemical shaping / V. V. Parshutin, V. V. Borodin. Kishinev: Shtiintsa, 1981. - 128 p.