VAK Russia 2.5.5 UDC 621.793.79

INFLUENCE OF DURATION OF MECHANICAL ACTIVATION OFMULTI-COMPONENT POWDER MIXTURE ON THE STRENGTH OF PLASMA COATING

Published in Voronezh Scientific-Technical Bulletin · Volume 3, Issue 3, 2024 · Pages 33–40 · Rubric: TEHNOLOGIYa I OBORUDOVANIE MEHANIChESKOY I FIZIKO-TEHNIChESKOY OBRABOTKI
DOI: https://doi.org/10.34220/2311-8873-2024-33-40
Received: 14.10.2024 Accepted: 28.10.2024 Published: 28.10.2024 Language of publication: ru-RU
The article considers the effect of the duration of mixing the components of the FeCoCrAlTiCuMo coating in a special mixer-activator on the strength of the resulting coating. Indirect confirmation of the effect of mechanical activation during mixing on the formation of the plasma coating was obtained and a rational mixing time was determined. Based on the data obtained, it is possible to judge the possibility of creating a HES coating by mixing the components in an inert atmosphere, which allows increasing the strength of the coating by more than 2 times, in comparison with mixing powders by the traditional method in an air atmosphere.
PLASMA SPRAYING, COATING QUALITY, STRENGTH, MIXING TIME, MECHANICAL ACTIVATION, MIXER
Text References
Text (PDF)
Read Download

1. Kadyrmetov, A. M. Prospects for the Application of Coatings Based on Multicomponent High-Entropy Alloys in Mechanical Engineering / A. M. Kadyrmetov, D. A. Popov, E. V. Snyatkov // Power Engineering and Electronics of Advanced Cars: Proceedings of the All-Russian Scientific and Practical Conference, Voronezh, April 08, 2021 / Responsible. editor V. I. Pryadkin. - Voronezh: Vo-ronezh State Forest Engineering University named after G. F. Morozov, 2021. - P. 36-39. - DOIhttps://doi.org/10.34220/PEEPC2021_36-39. - EDN EMFFGN.

2. Yurov, V. M. On the Issue of Friction of High-Entropy Alloys and Coatings / V. M. Yurov, S. A. Guchenko // Interactive Science. – 2019. – No. 9(43). – P. 34-37. – DOIhttps://doi.org/10.21661/r-508093. – EDN CLFBZF.

3. Structure and properties of high-entropy alloys and coatings: Technical program and theses of the school of young scientists, Belgorod, October 9–11, 2019 / Edited by G.A. Salishchev, M.S. Tikhonova, E.A. Shchigoleva. – Belgorod: Limited Liability Company Epicenter, 2019. – 72 p. – ISBN 978-5-6042972-3-0. – EDN WLBGYK.

4. Structure and properties of composite coating based on high-entropy alloy reinforced with CrB particles / A. A. Ruktuev, A. B. Yurgin, V. S. Shikalov [et al.] // Metal processing (technology, equipment, tools). - 2023. - Vol. 25, No. 3. - Pp. 87-103. - DOIhttps://doi.org/10.17212/1994-6309-2023-25.3-87-103. - EDN HVCASS.

5. Shirokov, Yu. G. Mechanochemistry. Theoretical foundations - 2015. - 224 p.

6. Kadyrmetov, A. M. X-ray diffraction analysis of the multicomponent FeCoCrAlTiCuMo al-loy obtained by plasma spraying with multiple reflow / A. M. Kadyrmetov, D. A. Popov, I. A. Simakin // Electrophysical methods of processing in modern industry: Proceedings of the V International Scien-tific and Practical Conference of Young Scientists, Postgraduates and Students, Perm, December 15-16, 2021. - Perm: Perm National Research Polytechnic University, 2022. - P. 104-107. - EDN NOZ-CVU.

7. Justification of the design and parameters of a special plasma torch for spraying multicom-ponent coatings / A. M. Kadyrmetov, D. A. Popov, A. I. Uskov, V. R. Fatkhulin // Modern production technologies in mechanical engineering: INTER-UNIVERSITY COLLECTION OF SCIENTIFIC WORKS. Volume Issue 16. - Voronezh: Publishing and Printing Center "Scientific Book", 2023. - P. 117-126. - EDN RZNCHD.

8. Analysis of regularities and determination of analytical dependencies for calculating the nec-essary parameters of the processes of mechanical grinding and mixing of bulk materials / A. F. Ilyush-chenko, A. I. Letsko, N. M. Parnitsky [et al.] // Powder metallurgy: Republican interdepartmental col-lection of scientific papers / NATIONAL ACADEMY OF SCIENCES OF BELARUS; STATE RE-SEARCH AND PRODUCTION ASSOCIATION OF POWDER METALLURGY, STATE SCIENTIFIC INSTITUTION "INSTITUTE OF POWDER METALLURGY NAMED AFTER ACADEMICIAN O. V. ROMAN". Volume Issue 45. – Minsk: Republican Unitary Enterprise "Publishing House" Belarusian Science ", 2022. – Pp. 35-43. – EDN EDDZMH.

9. Zakharov, D. A, Salnikov, A. V. Influence of powder mixing modes on the structure and physical and mechanical properties of VK10S hard alloy // Bulletin of the Samara State Technical University. Series: Technical sciences. 2013. No. 2. URL: https://cyberleninka.ru/article/n/vliyanie-rezhimov-smeshivaniya-poroshkov-na-strukturu-i-fiziko-mehanicheskie-svoystva-tverdogo-splava-vk10s (date of access: 17.09.2024).

10. Shevtsova, L. I. Determination of the mechanical activation time, ensuring the formation of a homogeneous structure of the VKNA-1V alloy / L. I. Shevtsova // Aerospace engineering, high tech-nologies and innovations. - 2022. - Vol. 1. - Pp. 264-265. - EDN TBIOMT.

11. Kochetov, N. A. Effect of mechanical activation time of the Ti + 2B mixture on the com-bustion of cylindrical and tape samples / N. A. Kochetov, S. G. Vadchenko // Physics of combustion and explosion. - 2015. - Vol. 51, No. 4. - Pp. 77-81. - DOIhttps://doi.org/10.15372/FGV20150410. - EDN UHCLAJ.

12. Abdulmenova, E. V. Regularities of structural changes after mechanical activation of pow-der TiNi and its interaction with hydrogen / E. V. Abdulmenova, S. N. Kulkov // News of universities. Physics. - 2019. - Vol. 62, No. 8 (740). - Pp. 137-142. - DOI 10.17223 / 00213411 / 62/8/137. - EDN YYLJNH.

13. Influence of mechanical activation of powder on the porosity of plasma coating / A. M. Kadyrmetov, D. A. Popov, A. I. Uskov, A. A. Melnikov // Modern production technologies in me-chanical engineering: Interuniversity collection of scientific papers. – Voronezh: Publishing and Print-ing Center "Scientific Book", 2024. – P. 61-65. – EDN EEQKRJ.