VAK Russia 2.5.5 UDC 621.8

DESIGN OF TECHNOLOGY FOR IMPROVING THE QUALITY OF THE SURFACE LAYER UNDER THERMAL INFLUENCE ON THE WORKPIECE

Published in Voronezh Scientific-Technical Bulletin · Volume 4, Issue 4, 2025 · Pages 3–11 · Rubric: TEHNOLOGIYa I OBORUDOVANIE MEHANIChESKOY I FIZIKO-TEHNIChESKOY OBRABOTKI
DOI: https://doi.org/10.34220/2311-8873-2024-6-6
Received: 16.12.2024 Accepted: 06.01.2025 Published: 06.01.2025 Language of publication: ru-RU
The article presents the design of a technology for improving the quality of the surface layer under thermal action on the workpiece. A method is considered that allows achieving a high level of hardening without applying a coating layer to the surface. The results of studies on surface hardening without applying a layer of material are presented.
TECHNOLOGY, FORMING, SURFACE QUALITY, TOOL, HARDENING, STRUCTURE
Text References
Text (PDF)
Read Download

1. Technologist's Handbook (reference edition) / ed. Suslova A.G. // M.: Innovative mechanical engineering, 2019. 800 p.

2. Smolentsev E.V. Design of electrical and combined processing methods M.: Mechanical en-gineering, 2005 - 511 p.

3. Electrophysical and electrochemical methods of materials processing: In 2 volumes/ Edited by V.P. Smolentsev. M.: Higher School, 1983.

4. Combined processing methods / V.P. Smolentsev, A.I. Boldyrev, A.V. Kuzovkin, G.P. Smo-lentsev, A.I.Chasovskikh. Voronezh: VSTU, 1996. 168 p.

5. Smolentsev V.P. The influence of electrochemical dimensional processing on the physical and mechanical characteristics of metals // Electrochemical processing of metals. Collection of scien-tific articles Chisinau: "Stiinza", 1972.

6. Sulima A.M. Surface layer quality and fatigue strength of parts made of heat-resistant and ti-tanium alloys / A.M. Sulima, M.I. Evstigneev. M.: Mashinostroenie, 1974.

7. State and prospects of development of combined processing methods / Smolentsev V.P., Smolentsev E.V. //Bulletin of the Rybinsk State Aviation Technological Academy named after P.A. Solovyov. 2017. No. 2 (41). pp. 5-9.

8. Ablyaz T.R. Study of changes in the properties of electrodes depending on the modes of wire-cut electroerosion treatment // Bulletin of PSTU. Mechanical engineering, materials science. - 2011. - Vol. 13. -No. 1. - pp. 87-93.

9. Ablyaz T.P., Shlykov E.C., Kremlev S.S. Application of coated tool electrodes for electro-erosion treatment of 38X2N2MA steel // STIN. - 2017. - No. 5. - pp. 20 -21

10. Empirical modeling of interelectrode flow during electroerosion treatment of 38X2N2MA steel / T.N., Balyas, E.S. Shlykov, D.A. Borisov, A.A. Shumkov, I.Yu.// Bulletin of Perm National Re-search Polytechnic University. Mechanical engineering, materials science. - 2017. - Vol. 19, No. 2. - pp. 67-79.

11. Kutz V.V. Investigation of the process of obtaining holes with a hollow electrode on a modernized electroerosion CNC machine / V.V. Kutz, M.S. Razumov, D.A. Zubkov, A.S. Byshkin, A.A. Nestruev // Izvestiya Tula State University. Technical sciences. 2020. No. 3. pp. 395-402.

12. Science-based technologies creation based on combined processing methods for fabrication aerospace filters / A.Yu. Ryazantsev, A.A. Shirokozhukhova, V.G. Gritsyuk// Materials Today: Pro-ceedings, 19 (2019), 2065-2067 DOI:https://doi.org/10.1016/j.matpr.2019.07.075

13. Innovative Methods For Obtainig Artificial Roughness On The Surfaces Of Heat-Loaded Parts Of The Liquid Rocket Engines Combustion Chamber / A.Yu. Ryazantsev, A.A. Shirokozhu-khova, Yukhnevich S.S. // AIP Conference Proceedings 2318, 030004 (2021); https://doi.org/10.1063/5.0035987

14. Micro electrical discharge machining single discharge temperature field simulation / Z.L. Peng, Y.N. Li, D. Fang, Y.Y. Zhang. - USA: JCPRC5, 2013. - P. 859-864.

15. Jiajing Tang, Xiaodong Yang. A Thermo-hydraulic Mod¬eling for the Formation Process of the Discharge Crater in EDM // 18th CIRP Conference ISEM XVIII. - 2016. - № 42. - P. 685-690.

16. Obara H. Detection of Discharging Position on WEDM // Proceedings of 10th ISEM, 1992 - p. 404-409.

17. Umang Maradia. Meso-Micro EDM: diss. Dr. sc. ETH Zurich No. 22024. - Zurich, 2014. - 246 p.

18. Matthias Hackert-Oschatzchen. Single Discharge Simula¬tions of Needle Pulses for Electro-thermal Ablation. - Rotterdam: COMSOL Conference, 2013. - P. 1-5.

19. Weingartner E., Kuster F., Wegener K. Modeling and sim¬ulation of electrical discharge ma-chining // 1st CIRP Global Web Conference. - 2012. - № 2. - P. 74-78.

20. Chander Parkash Khatter Analysis of surface integrity in electrical discharge machining (EDM) process for tungsten carbide material: dis. Ph. D. - Patiala, India, 2010.

21. Kirillov, O. The technology of combined processing of extruded materials / O. Kirillov, V. Smolentsev, S. Yukhnevich // MATEC Web of Conferences : 2018 International Conference on Mod-ern Trends in Manufacturing Technologies and Equipment, ICMTMTE 2018, Sevastopol, 10–14 September 2018. – Sevastopol: EDP Sciences, 2018. – P. 01004. – DOIhttps://doi.org/10.1051/matecconf/201822401004. – EDN BYTCJA.

22. Yukhnevich, S. Provision of performance parameters of the product made from extruded materials by means of technological methods of combined processing / S. Yukhnevich, O. Kirillov, E. Kotukov // Materials Today: Proceedings : International Conference on Modern Trends in Manufactur-ing Technologies and Equipment, ICMTMTE 2019, Sevastopol, 09–13 September 2019. Vol. 19. – Sevastopol: Elsevier Ltd, 2019. – P. 2382-2384. – DOIhttps://doi.org/10.1016/j.matpr.2019.08.039. – EDN JPJX-TU.