VAK Russia 2.5.5 UDC 621.793.74

ASSESSMENT OF THERMOMECHANICAL PROCESSING FORCES WITH ROLLER TOOL OF GAS-THERMAL COATINGS BASED ON NICKEL

Published in Voronezh Scientific-Technical Bulletin · Volume 1, Issue 1, 2025 · Pages 12–24 · Rubric: TEHNOLOGIYa I OBORUDOVANIE MEHANIChESKOY I FIZIKO-TEHNIChESKOY OBRABOTKI
DOI: https://doi.org/10.34220/2311-8873-2025-12-24
Received: 02.04.2025 Accepted: 15.04.2025 Published: 15.04.2025 Language of publication: ru-RU
An effective method of thermomechanical hardening of nickel-based gas-thermal coatings is considered in the aspect of assessing the forces of their rolling with a roller tool. The rolling force depends on the specified value of plastic deformation of the coatings, the coating temperature in the range of 273...1473 K, the deformation rate and geometric parameters of the roller and the processed cylindrical surface of the coating.
NICKEL-BASED THERMAL GAS COATINGS, THERMOMECHANICAL TREATMENT, RUN-IN FORCE, HARDENING
Text References
Text (PDF)
Read Download

1. Barvinok, V. A. Stress State Management and Properties of Plasma Coatings. - M.: Mashi-nostroenie, 1990. - 384 p.

2. Babad-Zakhryapin A. A. Coating Defects. - M.: Energoatomizdat, 1984. -152 p.

3. Powder Metallurgy and Sprayed Coatings / V. N. Antsiferov, G. V. Bobov, L. K. Druzhinin, et al. - M.: Metallurgy, 1984. - 792 p.

4. Kudinov, V. V. Plasma Coatings. - M.: Nauka, 1977. - 184 p.

5. Przybylski, V. Surface Plastic Treatment Technology: Translated from Polish. - M.: Metallurgy, 1991. - 479 p.

6. Odintsov, L. G. Hardening and finishing of parts by surface plastic deformation. - M.: Me-chanical Engineering, 1984. -328 p.

7. Bernstein, A. L. Thermomechanical treatment of steel / A. L. Bernstein, V. A. Zaimovsky, L. M. Kaputsina. - M.: Metallurgy, 1983. - 480 p.

8. Polukhin, P. I. Resistance to plastic deformation of metals and alloys: Handbook / P. I. Polu-khin, G. Ya. Guk, A. M. Galkin. - M.: Metallurgy, 1983. - 252 p.

9. Yakovlev, K. A. Development of the process of thermomechanical hardening of surfaces with gas-thermal coatings / Abstract of Cand. Sci. (Eng.) Dissertation on Specialization 05.03.01. - Vo-ronezh, 1998. - 14 p.

10. Golub, V. P. Methodology for Analysis of Tensile Diagrams of Heat-Resistant Alloys / V. P. Golub, V. A. Gorodetsky, A. S. Oleynik, V. N. Pavlov // Factory Laboratory. - 1988. - No. 8. - P. 93-95.

11. Timoshenko, S. P. Theory of Elasticity / S. P. Timoshenko, J. Goodier. - Translated from English. - Moscow: Nauka, 1979. - 560 p.

12. Braslavsky, V. M. Technology of Roller Rolling of Large Parts. - M.: Mechanical Engineer-ing, 1975. - 160 p.