VAK Russia 2.5.5 UDC 621.03 VAK Russia 2.5.6

ANALYSIS OF THE TECHNOLOGICAL POSSIBILITY OF MANAGING THE ROUGHNESS PARAMETERS OF STAINLESS STEELS IN THE PROCESS OF JET COMBINED ELECTROLYTIC-PLASMA TREATMENT

Published in Voronezh Scientific-Technical Bulletin · Volume 3, Issue 3, 2025 · Pages 10–24 · Rubric: TEHNOLOGIYa I OBORUDOVANIE MEHANIChESKOY I FIZIKO-TEHNIChESKOY OBRABOTKI
DOI: https://doi.org/10.34220/2311-8873-2025-10-24
Received: 11.10.2025 Accepted: 23.10.2025 Published: 23.10.2025 Language of publication: ru-RU
This article discusses the technological possibility of controlling surface roughness parameters in a wide range of values, from processing surfaces made in the preparation operations to finishing at the nanoscale. The studies used samples made of 20Kh13, 08Kh18N9T, AISI 304, AISI 310, materials obtained by SLM technology, AISI 316L steel, and nickel-based heat-resistant alloys such as EP648 and Inconel 718. It was shown that the processing involves a sequential combination of focused electrolyte plasma jet processing followed by focused glow discharge plasma finishing. It has been shown that pre-treatment can reduce the roughness parameter from Ra 80 μm to Ra 0.2 μm for various stainless steels and alloys produced by SLM technology, while finishing can reduce the roughness parameter from Ra 0.2 to Ra 0.004 μm, as is the case for 08X18N9T stainless steel. Atomic force microscopy shows that the surface of stainless-steel samples after jet electrolyte-plasma treatment has an average surface height of Sa 11.713 nm at 2499.515 μm2. The results of these studies can be used for surface treatment of stainless steels and alloys in medicine and other fields.
ANOD, ELECTROLYTE, JET, ELECTRIC DISCHARGE, PARAMETERS OF ROUGHNESS, MEDICAL TECHNOLOGY
Text References
Text (PDF)
Read Download

1. Stepanova, T. D. Russia's Technological Sovereignty as an Element of Economic Security / T. D. Stepanova // Economy: Yesterday, Today, Tomorrow. - 2022. - Vol. 12, No. 9-1. - Pp. 567-577. - DOIhttps://doi.org/10.34670/AR.2022.19.76.044. - EDN JNNZEN.

2. Petrov, V.V. Russia's Technological Sovereignty: Conceptual Approaches and Practical Im-plementation // Problems of Economic Development. - 2020. - Vol. 26, No. 2. - Pp. 47-56.

3. The Role of the University in the Integration of Education, Science, and Business / S. I. Golovkina, A. I. Popova, S. A. Chernogorsky, N. V. Valebnikova // University as a Factor in Russia's Modernization: History and Prospects (on the 55th Anniversary of I. N. Ulyanov Cheboksary State University): Proceedings of the International Scientific and Practical Conference, Cheboksary, October 18, 2022. - Cheboksary: Limited Liability Company "Publishing House" Sreda ", 2022. - Pp. 138-140. - EDN NERYTD.

4. Principles of Building Automated Systems to Support the Life Cycle of Innovative Products / A. I. Nadeev, A. I. Popova, A. V. Surina, Yu. K. Svechnikov // Sensors and Systems. - 2006. - No. 11. - Pp. 59-63. - EDN KWMQTP.

5. Nano/microtexturing of surfaces for antibacterial protection / A. A. Nastulyavichus, S. I. Kudryashev, N. A. Smirnov [et al.] // Laser, plasma research and technologies - LaPlas-2018: Collection of scientific papers of the IV International conference, Moscow, January 30 – January 01, 2018. - Moscow: National Research Nuclear University MEPhI, 2018. - P. 537-538. - EDN YUMHTV.

6. Sub-picosecond laser surface modification of Ti–Ni alloy and its antibacterial activity / I. N. Saraeva, A. A. Nastulyavichus, I. V. Sozaev [et al.] // Laser Physics Letters. - 2023. - Vol. 20, No. 11. – P. 115602. – DOIhttps://doi.org/10.1088/1612-202x/acfd93. – EDN XFNXXP.

7. A bacterial misericorde: Laser-generated silicon nanorazors with embedded biotoxic nano-particles combat the formation of durable biofilms / I. N. Saraeva, E. R. Tolordava, A. A. Nastulyavichus [et al.] // Laser Physics Letters. – 2020. – Vol. 17, No. 2. – P. 025601. – DOIhttps://doi.org/10.1088/1612-202X/ab5fca. – EDN SUYAUN.

8. Patent No. 2799364 C1 Russian Federation, IPC C23C 18/44, A61L 27/28, A61L 27/54. Method for producing an antibacterial coating on the surface of titanium-based alloys for medical purposes: No. 2022131663: declared 05.12.2022: published 05.07.2023 / T. O. Teplyakova, A. S. Konopatsky, S. D. Prokoshkin; applicant Federal State Autonomous Educational Institution of Higher Education "National University of Science and Technology "MISiS". – EDN PLOISS.

9. Shalnov, V.A. Grinding and polishing of high-strength materials / V.A. Shalnov. – Moscow: Mashinostroenie, 1972. – 271 p.: ill.: 9000.00.

10. Nazarova, D. Yu. Analysis of methods of chemical and electrochemical polishing of aluminum alloy AMg6 / D. Yu. Nazarova, A.M. Gaidukova // Advances in Chemistry and Chemical Technology. – 2023. – Vol. 37, No. 14(276). – Pp. 72-74. – EDN XCJQTM.

11. Stroilov, A.M. Comparative analysis of the reflectivity of aluminum alloy D16 after chemical and electrochemical polishing / A.M. Stroilov, A.M. Gaidukova // Advances in Chemistry and Chemical Technology. – 2022. – Vol. 36, No. 4(253). – Pp. 113-115. – EDN LEGDSN.

12. Electrical Discharge Machining of Metals / K. E. Anokhin, I. V. Guz, D. S. Soldatov, D. A. Noskov // Results of Modern Scientific Research and Development: Collection of Articles from the XIX All-Russian Scientific and Practical Conference, Penza, January 23, 2023. – Penza: Science and Education (IP Gulyaev G. Yu.), 2023. – Pp. 30-32. – EDN QUZEHJ.

13. Parfenov, E.; Mukaeva, V.; Farrakhov, R. Plasma electrolytic treatments for advanced surface finishing technologies. Mater. Technol. Des. 2014, 1, 34–41.

14. Zakharov, S. V. Ionization Model of Electrolytic-Plasma Polishing / S. V. Zakharov, M. T. Korotkikh, E. V. Gonibesova // SPbPU Science Week: Proceedings of the Scientific Conference with International Participation. In 2 parts, St. Petersburg, November 18–23, 2019. Volume 2. – St. Petersburg: Polytech-Press, 2020. – Pp. 255–258. – EDN PNORZK.

15. A. Yu. Korolev, V. A. Tomilo, V. S. Niss. Energy Characteristics of the Vapor-Gas Shell Formation Stage during Electrolytic-Plasma Processing. Reports of the National Academy of Sciences of Belarus, Vol. 68, No. 4, pp. 344–352, 2024 https://doi.org/10.29235/1561-8323-2024-68-4-344-352 EDN: https://elibrary.ru/IMMWPO

16. Wang J, Zong XM, Liu JF, Feng S (2017) Influence of voltage onelectrolysis and plasma polishing. ICMEIM 2017. Atlantis Press:2352-5401. https://doi.org/10.2991/icmeim-17.2017.333.

17. Smyslova MK, Tamindarov DR, Plotnikov NV, Modina IM, Semenova IP (2018) Surface electrolytic-plasma polishing of Ti-6Al-4V alloy with ultrafine-grained structure produced by severe plastic deformation. IOP Conf Ser: Mater Sci Eng IOP Publishing 461(1):012079. https://doi.org/10.1088/1757-899X/461/1/012079 EDN: https://elibrary.ru/BFSXWW

18. Analysis of surface morphology after jet electrolytic-plasma processing of SLM materials / K. L. M. Diatu, D. N. Ivanov, S. Yu. Simonov [et al.] // Modern mechanical engineering. Science and education. DOI: https://doi.org/10.18720/SPBPU/2/id24-130; EDN: https://elibrary.ru/IMSCVE

19. Evaluation of the Feasibility of Polishing Stainless Steels by Jet Electrolytic-Plasma Treat-ment / M. V. Novoselov, N. G. Shilling, A. A. Rudavin [et al.] // Bulletin of Perm National Research Polytechnic University. Mechanical Engineering, Materials Science. - 2018. - Vol. 20, No. 1. - Pp. 94-102. - DOIhttps://doi.org/10.15593/2224-9877/2018.1.10. - EDN YVASNY.

20. Huang, Y., Wang, C., Ding, F. et al. Principle, process, and application of metal plasma electrolytic polishing: a review. Int J Adv Manuf Technol 114, 1893–1912 (2021). https://doi.org/10.1007/s00170-021-07012-7 EDN: https://elibrary.ru/EBQDYK

21. Ghezri, A.; Pratama, K.; Scholl, Y.; Küenzi, A.; Nelis, T.; Burger, J.; Bessire, C. Energy Ef-ficient Jet Polishing via Electrolytic Plasma Enhances Corrosion Resistance in Stainless Steel. J. Manuf. Mater. Process. 2024, 8, 289. https://doi.org/10.3390/jmmp8060289 EDN: https://elibrary.ru/VYAOPR

22. Patent No. 2623555 C1 Russian Federation, IPC C25F 7/00. Installation for electrolytic-plasma treatment of turbine blades: No. 2016120180: appl. 24.05.2016: published 27.06.2017 / A. I. Popov, M. M. Radkevich, V. N. Kudryavtsev [et al.]; applicant Federal State Autonomous Educational Institution of Higher Education "Peter the Great St. Petersburg Polytechnic University" (FGAOU VO "SPbPU"). – EDN USJMHW.

23. Technical conditions TU 4254-001-58699387-2010: Normative and technical documents establishing requirements for scanning probe microscopes Ntegra SPECTRA, Ntegra PRIMA, Ntegra VITA, Ntegra THERMA, Ntegra AURA, Ntegra MAXIMUS, Ntegra SOLARIS, Ntegra SOLARIS Duo, Ntegra TOMO, Ntegra LIFE

24. GOST R 8.700-2010 NATIONAL STANDARD OF THE RUSSIAN FEDERATION State system for ensuring the uniformity of measurements METHOD OF MEASURING THE EFFECTIVE HEIGHT OF SURFACE ROUGHNESS USING A SCANNING PROBE ATOMIC FORCE MICROSCOPE. State system for ensuring the uniformity of measurements. Methods of surface roughness: effective height measurements using a scanning probe atomic force microscope.

25. Popov, A. I. Analysis of plasma formation conditions in an electrolyte jet during anode surface machining in the 20-500 V range / A. I. Popov // Voronezh Scientific and Technical Bulletin. - 2024. - Vol. 3, No. 3(49). - Pp. 3-16. - DOIhttps://doi.org/10.34220/2311-8873-2024-1-1. - EDN FLXDZE.

26. GOST 27964-88. Measurement of roughness parameters. Terms and definitions.

27. ISO 21920-2:2021 Geometrical product specifications (GPS) - Surface texture: Profile Part 2: Terms, definitions, and surface texture parameters.

28. GOST R ISO 4287-2014. National standard of the Russian Federation. Geometrical product characteristics (GPS). Surface structure. Profile method. Terms, definitions, and surface structure parameters

29. GOST 25142—82 (ST SEV 1156—78). Surface roughness. Terms and definitions.

30. Popov, A. I. Atomic-dislocation model of surface layer removal by jet electrolytic-plasma polishing / A. I. Popov // Voronezh Scientific and Technical Bulletin. - 2024. - Vol. 1, No. 1 (47). - Pp. 31-51. - DOIhttps://doi.org/10.34220/2311-8873-2024-31-51. - EDN DWAPMM.