1. Technologist's Handbook (reference edition) / ed. Suslova A.G. // M.: Innovative mechanical engineering, 2019. 800 p.
2. Smolentsev E.V. Design of electrical and combined processing methods M.: Mechanical engineering, 2005 - 511 p. EDN: https://elibrary.ru/QNBFMR
3. Electrophysical and electrochemical methods of materials processing: In 2 volumes/ Edited by V.P. Smolentsev. M.: Higher School, 1983.
4. Combined processing methods / V.P. Smolentsev, A.I. Boldyrev, A.V. Kuzovkin, G.P. Smolentsev, A.I.Chasovskikh. Voronezh: VSTU, 1996. 168 p. EDN: https://elibrary.ru/LXCKFG
5. Smolentsev V.P. The influence of electrochemical dimensional processing on the physical and mechanical characteristics of metals // Electrochemical processing of metals. Collection of scientific articles Chisinau: "Stiinza", 1972.
6. Sulima A.M. Surface layer quality and fatigue strength of parts made of heat-resistant and titanium alloys / A.M. Sulima, M.I. Evstigneev. M.: Mashinostroenie, 1974.
7. State and prospects of development of combined processing methods / Smolentsev V.P., Smolentsev E.V. //Bulletin of the Rybinsk State Aviation Technological Academy named after P.A. Solovyov. 2017. No. 2 (41). pp. 5-9. EDN: https://elibrary.ru/YPZEQZ
8. Ablyaz T.R. Study of changes in the properties of electrodes depending on the modes of wirecut electroerosion treatment // Bulletin of PSTU. Mechanical engineering, materials science. - 2011. - Vol. 13. -No. 1. - pp. 87-93.
9. Ablyaz T.P., Shlykov E.C., Kremlev S.S. Application of coated tool electrodes for electroerosion treatment of 38X2N2MA steel // STIN. - 2017. - No. 5. - pp. 20 -21 EDN: https://elibrary.ru/ZDRIUL
10. Empirical modeling of interelectrode flow during electroerosion treatment of 38X2N2MA steel / T.N., Balyas, E.S. Shlykov, D.A. Borisov, A.A. Shumkov, I.Yu.// Bulletin of Perm National Research Polytechnic University. Mechanical engineering, materials science. - 2017. - Vol. 19, No. 2. - pp. 67-79. DOI: https://doi.org/10.15593/2224-9877/2017.2.05; EDN: https://elibrary.ru/YTOHGT
11. Kutz V.V. Investigation of the process of obtaining holes with a hollow electrode on a modernized electroerosion CNC machine / V.V. Kutz, M.S. Razumov, D.A. Zubkov, A.S. Byshkin, A.A. Nestruev // Izvestiya Tula State University. Technical sciences. 2020. No. 3. pp. 395-402. DOI: https://doi.org/10.24411/2071-6168-2020-00015; EDN: https://elibrary.ru/DJWSLT
12. Science-based technologies creation based on combined processing methods for fabrication aerospace filters / A.Yu. Ryazantsev, A.A. Shirokozhukhova, V.G. Gritsyuk// Materials Today: Proceedings, 19 (2019), 2065-2067 DOI:https://doi.org/10.1016/j.matpr.2019.07.075 EDN: https://elibrary.ru/SSBVAN
13. Innovative Methods For Obtainig Artificial Roughness On The Surfaces Of Heat-Loaded Parts Of The Liquid Rocket Engines Combustion Chamber / A.Yu. Ryazantsev, A.A. Shirokozhukhova, Yukhnevich S.S. // AIP Conference Proceedings 2318, 030004 (2021); https://doi.org/10.1063/5.0035987 EDN: https://elibrary.ru/QJYPUS
14. Micro electrical discharge machining single discharge temperature field simulation / Z.L. Peng, Y.N. Li, D. Fang, Y.Y. Zhang. - USA: JCPRC5, 2013. - P. 859-864.
15. Jiajing Tang, Xiaodong Yang. A Thermo-hydraulic Modeling for the Formation Process of the Discharge Crater in EDM // 18th CIRP Conference ISEM XVIII. - 2016. - № 42. - P. 685-690. DOI: https://doi.org/10.1016/j.procir.2016.02.302
16. Obara H. Detection of Discharging Position on WEDM // Proceedings of 10th ISEM, 1992 - p. 404-409.
17. Umang Maradia. Meso-Micro EDM: diss. Dr. sc. ETH Zurich No. 22024. - Zurich, 2014. - 246 p.
18. Matthias Hackert-Oschatzchen. Single Discharge Simulations of Needle Pulses for Electrothermal Ablation. - Rotterdam: COMSOL Conference, 2013. - P. 1-5.
19. Weingartner E., Kuster F., Wegener K. Modeling and simulation of electrical discharge ma-chining // 1st CIRP Global Web Conference. - 2012. - № 2. - P. 74-78. DOI: https://doi.org/10.1016/j.procir.2012.05.043
20. Chander Parkash Khatter Analysis of surface integrity in electrical discharge machining (EDM) process for tungsten carbide material: dis. Ph. D. - Patiala, India, 2010.